# Chapter 6: Texecom Panels

# Texecom 412/816/832 Programming

Standard Texecom panels with **red serial cable**

---

#### Version Information

**Texecom 412/816:**
- Known working app versions: V16.13

**Texecom 832:**
- Known working versions: v13, v14 (E)

**Note:** Texecom Elite panels are NOT supported on app, but work with serial for CID

---

#### Basic Programming

**Access Programming:**
- Installer code + Menu + 9
- Default installer code: **1234**

**Location 70**
- Switch ON LEDs 1, 2, 5, and 8
- Press ARM button to confirm

**Location 71 Programming:**
- **71/0** = **5555555** (tel number) - Press ARM button
- **71/1** = **[4-digit account number]** - Press ARM button
- **71/2** = **4** (Contact ID) - No need to press ARM
- **71/3** = **6** (dial attempts) - No need to press ARM
- **71/5** = Switch ON all LEDs - Press ARM button
- **71/8** = LED 8 OFF for Tip & Ring / ON for Serial

**Location 76**
- **76/8** = LED 8 ON (Dialler)

---

#### Serial Connection Configuration

For serial connection ONLY:
- **71/8** = LED 8 **ON**

---

#### Texecom 412 Serial Specific

*Known working app version: V14*

**Location 70**
- Switch ON LEDs 1, 2, and 8 only
- Press ARM button

**Additional for Serial:**
- **71/8** = Switch ON 8
- **76/5** = **3** (com IP on Comm 1)
  
**OR** (NOT BOTH)
- **76/9** = **3** (com IP on Comm 2)

---

#### Converting from Serial to Tip & Ring

If panel was previously on serial and now using Tip & Ring:
- **71/8** = **0**
- **76/5** = **0**

---

#### Special Notes

**Texecom 816:**
- Serial cable connection must be a Texecom GSM type

# Texecom MiAlarm PANEL MODE

Configuration for MiAlarm compatibility

**Note:** Texecom Elite panels are NOT supported on app, but work with serial for CID

---

#### Programming Steps

1. **Enter Programming Mode**
   - Enter Installer Code
   - Press Menu button
   - Press 9

2. **Location 76/0**
   - Press location 76
   - Press sublocation 0
   - Ensure LED 1 is **ON**
   - If not ON: Press 1, then YES/Tick button

3. **Location 76/2**
   - Press location 76
   - Press sublocation 2
   - Enter UDL code: **1234**
   - Press YES/Tick button

4. **Location 76/5**
   - Press location 76
   - Press sublocation 5
   - Press **3**

5. **Exit Programming**
   - Press Menu button
   - Press 99

---

#### Important Notes

- This configuration enables MiAlarm compatibility