Chapter 6: Texecom Panels

Texecom 412/816/832 Programming
Standard Texecom panels with red serial cable 
 
 Version Information 
 Texecom 412/816: 
 
 Known working app versions: V16.13 
 
 Texecom 832: 
 
 Known working versions: v13, v14 (E) 
 
 Note: Texecom Elite panels are NOT supported on app, but work with serial for CID 
 
 Basic Programming 
 Access Programming: 
 
 Installer code + Menu + 9 
 Default installer code: 1234 
 
 Location 70 
 
 Switch ON LEDs 1, 2, 5, and 8 
 Press ARM button to confirm 
 
 Location 71 Programming: 
 
 71/0 = 5555555 (tel number) - Press ARM button 
 71/1 = [4-digit account number] - Press ARM button 
 71/2 = 4 (Contact ID) - No need to press ARM 
 71/3 = 6 (dial attempts) - No need to press ARM 
 71/5 = Switch ON all LEDs - Press ARM button 
 71/8 = LED 8 OFF for Tip & Ring / ON for Serial 
 
 Location 76 
 
 76/8 = LED 8 ON (Dialler) 
 
 
 Serial Connection Configuration 
 For serial connection ONLY: 
 
 71/8 = LED 8 ON 
 
 
 Texecom 412 Serial Specific 
 Known working app version: V14 
 Location 70 
 
 Switch ON LEDs 1, 2, and 8 only 
 Press ARM button 
 
 Additional for Serial: 
 
 71/8 = Switch ON 8 
 76/5 = 3 (com IP on Comm 1) 
 
 OR (NOT BOTH) 
 
 76/9 = 3 (com IP on Comm 2) 
 
 
 Converting from Serial to Tip & Ring 
 If panel was previously on serial and now using Tip & Ring: 
 
 71/8 = 0 
 76/5 = 0 
 
 
 Special Notes 
 Texecom 816: 
 
 Serial cable connection must be a Texecom GSM type

Texecom MiAlarm PANEL MODE
Configuration for MiAlarm compatibility 
 Note: Texecom Elite panels are NOT supported on app, but work with serial for CID 
 
 Programming Steps 
 
 
 Enter Programming Mode 
 
 Enter Installer Code 
 Press Menu button 
 Press 9 
 
 
 
 Location 76/0 
 
 Press location 76 
 Press sublocation 0 
 Ensure LED 1 is ON 
 If not ON: Press 1, then YES/Tick button 
 
 
 
 Location 76/2 
 
 Press location 76 
 Press sublocation 2 
 Enter UDL code: 1234 
 Press YES/Tick button 
 
 
 
 Location 76/5 
 
 Press location 76 
 Press sublocation 5 
 Press 3 
 
 
 
 Exit Programming 
 
 Press Menu button 
 Press 99 
 
 
 
 
 Important Notes 
 
 This configuration enables MiAlarm compatibility