General FINMON Programming

This page covers the essential programming requirements for all Finmon radio installations.

---

Required Programming Steps

The following must be programmed for the Finmon radio to work correctly:

1. Account Code

   • Four digit code as required by control room
   • Must be inserted in all required locations (some panels need it in multiple places)
   • For six digit fields: program the four digits followed by FF (e.g., 1234FF)

2. Telephone Number

   • Program '5555555' in both primary and secondary locations
   • Must be exactly seven 5's

3. Communication Format

   • Contact ID must be enabled
   • This is the standard format for all installations

4. Dial Attempts

   • Minimum of 6 attempts required
   • Ensures reliable communication

5. Dial Timeout

   • For kiss-on (if applicable): minimum 60 seconds
   • If no timeout available, ensure attempts cover:
     • 90 seconds for server send
     • Additional 90 seconds for direct send
     • SMS send time (if enabled)
   • Note: SMS limit is 20 free messages per unit per month

6. Dialing Method

   • Tone dialling must be enabled (usually default)
   • Do not use pulse dialling

7. Special Requirements

   • Forced dialling must be enabled (mostly for Caddx panels)

---

Important Notes

• Always verify all settings before leaving site
• Test communication after programming
• Document any deviations from standard programming
• Contact Finmon support if standard settings don't work