Risco Configuration

Complete programming guide for Risco panels

---

Accessing Programming

1. Press MENU BUTTON
2. Enter INSTALLER CODE (Default: 1111)
3. Navigate to "PROGRAMMING" → ENTER
4. Navigate to "COMMUNICATION" → ENTER

---

Monitoring Station Setup

Navigate to "MONITORING STATION (MS)" → ENTER
Navigate to "MONITORING STATION 1 (MS 1)" → ENTER

Configure the following:

• TYPE = VOICE
• CHANNEL = PSTN/GSM
• ACCOUNT = 6 digit code provided by office (e.g., 001052)
• PHONE = 555 555 5
• MS RETRIES = 3

---

Timer Configuration

Navigate to "TIMERS":

• CANCEL DELAY = 0
• ABORT ALARM = 0

---

Periodic Test Setup

Navigate to "PERIODIC TEST":

• TIME = 2200 (for 10:00 PM test)
• RECURRENCE = EVERY 1 DAY

---

Report Split Configuration

Navigate to "REPORT SPLIT":

• ARM/DISARM = "NON" for DOMESTIC / "CALL MS1 ONLY" for COMMERCIAL
• MS URGENT = "CALL MS1 ONLY"
• MS NON URGENT = "CALL MS1 ONLY"

---

Cloud Settings

Back to main COMMUNICATION menu
Navigate to "CLOUD":

• MS CALL ALL = ENABLED
• FM CALL ALL = ENABLED

---

Exit Programming

1. Press MENU
2. Press MENU
3. Press MENU, 0, ENTER to exit

---

Important Notes

• 6-digit account codes are standard for Risco
• Test transmission after programming
• Verify cloud settings for modern installations
• Commercial sites should always report arm/disarm events