Orisec Configuration
Orisec panels support both Tip/Ring and Com Port connections
Orisec Tip/Ring Configuration
- Enter Installer Code
- Select Programming Menu → Tick/Enter
- Go to ARC Set up
- Phone Number: 555 5555
- Account Number: As supplied by control room/software
- Protocol: Contact ID
- Dial Seq: 1
- Any issues with not sending - RESTART PANEL
Orisec Com Port Configuration
- Enter Installer Code
- Select Programming Menu → Tick/Enter
- Com Port Setup → Tick/Enter
- Select Com Port number 2
- Set mode to FINMON (Required for app)
- Hold Tick to go back
- Go to ARC Set up
- Phone Number: F555 5555 (Note the 'F' prefix)
- Account Number: As supplied by control room/software
- Protocol: Contact ID
- Dial Seq: 6
- Any issues with not sending - RESTART PANEL
App Configuration
Requirements:
- App version must be v4.37
- Serial Port must be set to Orisec/IDS
- MUST be set to FINMON under Comm Port Setup
Critical Notes
IF YOU AREN'T GETTING SIGNALS OUT:
- REBOOT THE PANEL
- If serial port connected with panel powered up, it won't be detected
- Always power cycle after connecting serial
Tip/Ring vs Com Port
Use Tip/Ring when:
- Simple installation
- No app control needed
- Standard monitoring only
Use Com Port when:
- App control required
- Remote programming needed
- Advanced features required